IPX8 Negative pressure Leak Testing Machine for Air Tightness Detecting
1. Introduction
Negative pressure leak testing machine can meet the requirement of IEC60529 for IPX8 testing and IEC60598, it is mainly applied to small appliances for air tightness detecting, and the leak points can be found out during the test.The equipment is mianly consisted by transparent Sealed jar and control unit, the equipment has negative pressure test function, air pressure test function and water pressure test function.
2. Features
1). Working principle: The sample is placed into the water, close the lid and start the equipment, start the vacuum pump to draw out the air on the water surface to make the pressure difference between the inner cavity and the outer cavity of the sample. At this time, two situations may occur: if the sample is a defective product, bubbles will continuously appear in the water, and the operator can observe the bubbling position. If the sample is a good product, no bubbles will pop out, the vacuum auto control and adjustable.
2). The jar is made of plexiglass, it is transparent for observe purpose.
3). Special silicone sealing ring, good elasticity, not easy to damage.
4). Control unit: 4.3 inch LCD touch screen. The pressure hold time, test pressure, delayed leak time and other data can set up by touch screen.
5). After the test is completed, the pressure can be automatically stopped, and the air inside the tank can be automatically drained. The operator can open the lid and take out the test sample.
6). Pressure control: pressure sensor made by Panasonic, can auto control the test pressure. Control accuracy: ±0002Mpa, display accuracy: 0.001Mpa.
7). Test function: negative pressure test, air pressure test, water pressure test
3. Parameter
| Outer size |
1200mm*1200mm*1400mm (L*W*H) |
| Inner size |
Φ500mm*500mm (customized) |
| Wall thickness |
15mm |
| Jar Material |
plexiglass |
| Flange thickness |
20mm |
| Flange material |
Stainless steel |
| Weight |
100KG |
| Pressure control mode |
auto |
| Pressure error |
±0.002 Mpa |
| Sensor display accuracy |
0.001Mpa |
| Test Depth |
0-5m |
| Pressure adjustment range |
-0.05MPa-0.05MPa |
| Pressure hold time |
0-9999 s |
| Automatic decompression delay |
0-9999s |
| Delay test time |
0-9999 s |
| Protection device |
Leakage switch protection |
| Working Power |
220V/50Hz |
| Working condition |
Temperature: 5℃~35℃
Relative humidity: ≤85%
Pressure: 86kPa~106kPa
|
4. FAQ
1). What is the warranty period of the equipment?
Answer: the equipment warranty is 12 months upon you receipt of the equipment
2). Can you provide third-lab calibration certificate?
Answer: Yes, the equipment can send to the third-labs authorized by ISO17025 and get the calibration certificate, but the buyer should undertake the charges.
3). Does this equipment has English operation interface?
Answer: of course, yes, the operation interface has English instruction.
5. COMPETITIVE ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.
2). Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers within 24 hours
Product Tags:
|
|
IPX8 Negative Pressure Leak Environment Test Equipment For Air Tightness Detecting Images
|
